Cleaning

Other cleaning products available from Protex include:

  • Protex Hand Cleaner in 5L and 20L
  • Protex Tyre Shine in 5L and 20L
  • Protex 20L Truck Wash
  • Protex Wheel Clean 500ml & 1L refill
  • Protex Windscreen Wash Additive 95ml

Fan clutch

Fan clutches reduce the drain of engine power and improve the efficiency of a vehicle’s cooling system. Fan clutches are fluid coupling devices which provide air flow through the radiator by using the water pump shaft to power a fan blade. Fan clutch should be checked for possible replacement when a new water pump is installed or when any of the following problems exist:

  • Engine Overheating
  • Silicon leaking from clutch unit
  • Fan spins with little or no resistance (free wheels)
  • Greasy build up at thermal spring or where shaft exits rear housing
  • Fan clutch vibrates on shaft or will not turn
  • Squealing noises from bearing
Disc Pad Wear Sensors

Disc Pad Wear Sensors

Disc pad wear sensors are an advanced safety feature on many late model vehicles. They are electronic devices used to indicate how much material is left before disc pad replacement is required. Disc brake pad wear sensors are designed to “fail” as brake pads wear. They should be changed whenever the pads are replaced or when the vehicle’s warning light indicates.

Protex high quality disc pad wear sensors are very competitively priced and a key feature is they fit not only Protex disc pads, but other brands of pads as well.

Like all Protex products, they are sourced from world leading suppliers which are quality accredited and built to Original Equipment standards. There are over 130 part numbers available to suit most of the vehicles requiring disc pad wear sensors in the Australian market today.

Steering & Suspension

Dedicated product development and worldwide sourcing will see the Protex steering & suspension range grow into one of the most comprehensive available in Australia.

Steering & Suspension

  • New Power Steering Pumps
  • Ball Joints
  • Tie Rod Ends
  • Idler Arms
  • Drag Links
  • Fitment Arms
  • Shock Absorbers
  • Rack Ends
  • Side Rods
  • Over 2100 References

Brake Hoses

Brake hoses are often over looked for fatigue and wear during servicing and tend only to be replaced after failing or leaking. Once a brake hose shows any sign of rubbing or cracking it should be replaced immediately.

The Protex range consists of over 700 hoses which cater for the majority of vehicles on Australian roads

Also available are Hose Manufacturing and Testing systems. The BHM2000 is a complete Manufacturing and testing system for larger Brake Specialists or those specialising in the supply of hoses.

Protex brake hose end fittings are also available as well as a complete range of hardware. Brake hoses

 

 

Clutch

Protex’s alliance with Exedy, one of the world’s largest clutch manufacturers, provides customers with one of the best offerings available. clutchOur range sees us with over 1200 references available, the vehicle coverage is second to none.

Purpose built and using only the best possible and most suitable components. Our clutch kits include the highest quality cover assemblies, discs, and release bearings. With advanced dampening mechanisms, premium quality friction facings, and high quality cover assemblies, Protex clutch kits guarantee correct fit and function every time.

Designed and built to OE specifications and perfectly suited for use in lightly modified vehicles or for daily driving. Whether it’s a complete kit or individual components you seek, we can assist in your needs.

 

 

 

Reconditioning & Exchange

All reconditioned units are rebuilt using only quality replacement components and are reconditioned to strict re-manufacturing procedures. All reconditioning takes place in our re-manufacturing facility located within head office, in Melbourne.

All units are fully disassembled, shot blast to bare metal and rebuilt with all necessary new wearing parts.

The end product is then tested in accordance to strict testing procedures.

Common reconditioned assemblies:

  • Calipers
  • Hydropowers
  • Master, Slave and Wheel Cylinders
  • Master Vacs

Coolant

Maintaining maximum engine performance and temperature is extremely important role and a quality Coolant is a must. The life of an engine, particularly high performance diesel engines, can be shortened or suffer damage, by either not using the right coolant or maintaining the level in the cooling system to with specification.

PROTEX LONG LIFE ORGANIC COOLANT

This is a premium quality, organic, long life anti-boil / anti freeze concentrate. Suitable for both automotive and heavy duty diesel engines. This coolant protects all metals found in cooling systems and gives excellent protection against cavitations erosion and significantly increases the operation life of water pumps.

It exceeds corrosion performance levels required to meet Australian standard AS/NZS 2108.1-1997. Containing 86% monoethylene glycol and a double inhibitor package ensuring ultimate corrosion protection and extended life service. It contains no silicates, borates, phosphates, nitrites, nitrates or amines and will not have adverse effects on hoses or gaskets.

PROTEX CONVENTIONAL ENGINE COOLANT TYPE A

Protex Type A coolant is a fully formulated ethylene glycol based anti-boil / anti-freeze concentrate. Suitable for most automotive vehicles it is manufactured to meet or exceed vehicle manufacturer, national and international standards. Offering protection for all metals used in today’s engines and against “hot spot” corrosion, common in aluminium cylinder heads. It delivers excellent cold climate protection and contains no amines or nitrites.

PROTEX CORROSION INHIBITOR TYPE B

Protex Type B coolant is an extremely effective, water based corrosion and rust inhibitor. It can be used in all automotive engines where anti-boil/anti-freeze is not recommended or required. This will guard against rust, scale and sludge build up and ensure complete protection for all metals found in automotive systems, including alloy. This product exceeds the requirements of AS/NZS 2108.1-1997. It has no harmful effect on rubber hoses and gaskets.

AC Condensers

Protex AC Condensers are the latest addition to the Protex cooling component range.

Designed to integrate seamlessly with the vehicle’s original air conditioning system and constructed using premium quality materials and a clear focus on the highest heat transfer performance possible. Through rigours testing and innovation Protex AC Condensers haven proven to be a quality product. All are available at a competitive price and the range is ever expanding range.

  • Quality Accredited to meet OE standardsprotex-condensers
  • Easy fitment
  • All come pressurised
  • Great performance & durability
  • 50 Part numbers currently being stocked
  • The range will continue to grow

Protex now has a complete cooling range available.

Radiators

Protex Radiators have a comprehensive and forever growing range available. With proven quality and meeting OE standards. Protex Radiators are setting the standard.
protex-radiators-and-condenser-product

  • Sourced from leading manufacturers
  • Manufactured with aluminium cores and plastic tanks
  • Manufactured with stainless steel cooper coolers
  • Proven quality
  • Made to OE standards
  • High quality finish on all units
  • Tight fin pattern
  • Thicker material for the inlet/outlet
  • Rubber mounts are included with thicker/ stonger mounting clips for the fan and condenser
  • Comprehensive warranty
  • Available at a competitive price

The warranty applies for a period of 24 months from the date of fitment or 50,000 kms whichever occurs first.